Само че, пари за тая кола съм изкарал точно с персонални компютри така, че не ме е страх да се ровя в нея с ваг-ком ето как се оправих със накладките: Open Rear Parking Brake Prerequisites: Connect a battery charger. Cycle the Parking Brake ON, then OFF first. [select] [53 - Parking Brake] [basic Settings - 04] Group 007 [Go!] Activate the Basic Setting. [ON/OFF/Next] The brake calipers will then open, allowing the pads to be changed. [Done, Go Back] [Close Controller, Go Back - 06] It is normal for the LED in the parking brake switch and the warning lamp in the instrument cluster to blink rapidly at this point. Close Rear Parking Brake Prerequisites: Connect a battery charger. [select] [53 - Parking Brake] [basic Settings - 04] Group 006 [Go!] Activate the Basic Setting. [ON/OFF/Next] The brake calipers will then close. [Done, Go Back] [Close Controller, Go Back - 06] The LED in the parking brake switch and the warning lamp in the instrument cluster will probably continue to blink rapidly. This should stop after cycling the Parking Brake ON, then OFF again.